Drawer fronts

Drawer front replacement across San Diego County

Drawer fronts are the visible face of every drawer in your kitchen or bathroom, and replacing them in a coordinating profile and finish is what makes a cabinet door replacement look like a complete update rather than a partial one. We connect San Diego homeowners with insured local cabinet crews that measure drawer openings precisely, order fronts that coordinate with the chosen door style, and mount them with the correct spacing and alignment.

(858) 925-5546 Request a quote

What's included in this service?

Measure each drawer opening on site to order fronts in the correct dimensions with appropriate reveal spacing
Match drawer front profile, material, and finish exactly to the chosen door style for a unified look
Remove existing drawer fronts by unscrewing the mounting hardware on the drawer box
Attach new drawer fronts to the existing drawer box with proper alignment screws and confirm spacing on all sides
Adjust drawer front alignment after mounting so gaps are even across the full run
Install hardware on new drawer fronts in the position that matches the door hardware layout

When do you need this service?

Drawer fronts show delamination, water staining, or a finish that no longer matches the cabinet doors after prior work
You are replacing cabinet doors and want the full cabinet run, doors and drawers, to update together
Drawer fronts are the wrong size for the current drawer configuration after a kitchen modification
The original drawer fronts have a profile that is no longer available and a close match will not work
One or more drawer fronts were damaged and the rest of the run needs to be replaced for consistency

What do homeowners ask about Drawer fronts?

Do drawer fronts have to match the cabinet doors exactly?

The profile and finish should coordinate, but they don't have to be identical. In most cases the drawer fronts are the same door style, for example shaker profile in the same painted color, for a clean uniform look. Some contemporary kitchens intentionally use a flat-panel drawer front with a shaker door for a mixed profile, but this is a deliberate design choice that works best when it is planned from the start.

Can drawer fronts be replaced without replacing the drawer boxes?

Yes. Drawer fronts mount separately from the drawer box using screws through the face of the drawer box into the back of the drawer front. As long as the drawer box is structurally sound, you replace only the front panel and leave the box in place. If the drawer box itself is damaged or the slides are failing, the crew addresses that repair separately.

How are drawer front dimensions determined?

Drawer fronts are measured from the cabinet face frame opening with a specific reveal (the gap between adjacent drawer fronts and around the perimeter) that matches the reveal on the cabinet doors. The crew measures each drawer opening on site rather than using nominal dimensions, since cabinets in older San Diego homes are rarely exactly standard size.

What material is best for drawer fronts in a coastal San Diego kitchen?

Thermofoil-wrapped MDF is the most moisture-resistant choice for drawer fronts in coastal San Diego kitchens. It won't warp or delaminate under normal humidity exposure the way solid wood can over time. Painted MDF is also a good choice when properly primed and finished. Solid wood drawer fronts are available and look beautiful, but they require more maintenance in humid coastal environments.